|
|
|
|
The MAX-UPENDER series is ideally suited for tipping loads
up to 90 degrees. Available with capacities of 2,000 to 6,000 lbs.
and a variety of standard platform sizes. The MAX-UPENDER is also
available custom built for those special handling requirements.
Designs of open frame, v-block, split platform and special sizes
are just a few of our custom capabilities.
|
Model
|
Capacity
(pounds)
|
Minimum
Platform
Size
|
Maximum
Platform
Size
|
Lowered
Height
|
Quote
|
|
LPTT-UP-20-90
|
2,000
|
24" x 36"
|
72" x 72"
|
10"
|
Quote
|
|
LPTT-UP-40-90
|
4,000
|
24" x 36"
|
72" x 72"
|
10"
|
Quote
|
|
LPTT-UP-60-90
|
6,000
|
24" x 36"
|
72" x 72"
|
10"
|
Quote
|
|
|
|
- 1 1/2 HP motor. 115/230 volt single phase or 230/460 three phase
voltage. Motor is internally mounted on most models.
- Push button magnetic back control box is standard with 6' cord.
- 10' power cord is standard (connector not included).
- Hydraulic gear pump with check valve, solenoid valve, filter
and velocity fuse is standard.
- Tilt limit switch.
|
- Control box includes magnetic starter transformer, thermal overload
and fuses.
- Designed for surface mount or lift table mounting. Contact factory for
special in floor requirements.
- Powered up and down 90 degree tilt.
- Color: Yellow top with blue frame.
- A 30 amp dedicated circuit is required for 115 volt operation.
- Consult factory for special electrical requirements.
|
|
|
Options:
|
- Foot control switch
- Lowering beeper
- Remote power unit
- Accordion bellows safety skirting
|
- Special color
- Adjustable tilt limit switch
- Raised base
- For special options contact factory
|
|
|
MAX-UPENDER
with Cradle Top
Ideal for upending metal coils or paper rolls. Shown here with a split upper platform allowing shaft placement
into load capacities from 2,000 to 6,000 lbs. with a variety of custom cradles and platform sizes.
|
|
|
MAX-UPENDER
with Custom Platform
Shown here is an open frame platform. This custom design allows operator access to the upended item for some
assembly and inspection. Contact us with your special upending requirements.
|
|
|
|
[lift tables]
[motorized carts]
[pallet stackers]
[battery handling equipment]
[custom material handling]
[contact]
[links]
|
|
