Stackers ::

MXPDSR Reach Stackers

Request MXPDSR Quote


MXPDSR Walkie Stacker

The MXPDSR walk behind reach stacker with power steering is an excellent value priced alternative to a sit-down or stand-up forklift. Ideal for material handling applications in which straddle legs would interfere with obstructions or limit load sizes and a short turning radius is desirable. The 23" of horizontal reach enables the MXPDSR to laterally place pallets in locations a standard straddle truck would not be able to access while maintaining a small footprint in comparison to a counter-balanced truck.

The MXPDSR can also be used for dock applications where semi-trucks need to be loaded and unloaded. It can lift and move pallets weighing up to 3,000 lbs to a maximum of 157" high. These heavy duty trucks come standard with integral 224Ah AGM batteries or can be upgraded to an industrial battery for extended operation times for those applications that frequently need to load, unload, transport and stack pallets across multiple shifts.

The high visibility I-beam mast of the MXPDSR, in combination with forward and back tilting, allows for accurate positioning of loads. With its compact chassis design and power steering abilities, the MXPDSR is able to maneuver in tight spaces that a traditional fork lift would be unable to. Featuring a ZAPI AC travel controller and AC drive motor, high torque is provided throughout the entire drive range.

The MXPDSR can also be used for dock applications where semi-trucks need to be loaded and unloaded. It can lift and move pallets weighing up to 3,000 lbs to a maximum of 157" high. These heavy duty trucks come standard with integral 224Ah AGM batteries or can be upgraded to an industrial battery for extended operation times for those applications that frequently need to load, unload, transport and stack pallets across multiple shifts.



The high visibility I-beam mast of the MXPDSR, in combination with forward and back tilting, sideshifting and extension allows for accurate positioning of loads. With its compact chassis design and power steering abilities, the MXPDSR is able to maneuver in tight spaces that a traditional fork lift would be unable to. Featuring a ZAPI AC travel controller and AC drive motor, high torque is provided throughout the entire drive range.

Request MXPDSR Quote

Ergonomic Handle

Ergonomic Handle

With infinitely variable speed operation for tight turning in close quarters, safety reversing switch and horn.

AC Controller

ZAPI Controller

Efficient controller distributes power to create a perfect blend of speed and torque to meet operator requirements.

AGM Batteries

AGM Batteries

Integral AGM batteries support opportunity charging & withstands vibration.

AC Drive System

AC Drive System

Fully sealed, high torque, brushless AC drive system requires no regular maintenance.

Specifications


ModelCapacity
(lbs)
LiftHeightFork
OD
StraddleTiltQuote
Form
StdMaxCol*Ext*IDODFB
MXPDSR303,000106"157"73.5"144"8"-31.5"34"/42"42"/50"Quote

Note: Extended height is calculated with a load backrest. Derate 500 lbs above 126" lift height. All specifications are based on the standard lift height. For exact specifications, please request a quote.

ModelMXPDSR30
Load Center24"
Capacity #3,000
Std Lift106"
Max Lift157"
Col Height*73.5"
Ext Height*144"
Fork OD8"-31.5"
Forward Tilt
Backward Tilt
Straddle ID34"/42"
Straddle OD42"/50"
Quote FormQuote

Note: Extended height is calculated with a load backrest. Derate 500 lbs above 126" lift height. All specifications are based on the standard lift height. For exact specifications, please request a quote.

Standard Features


  • 24volt ZAPI transistor control
  • High torque AC drive motor
  • Heavy duty transmission
  • Power Steering with Sideshift
  • Shaft mounted electromechanical brake
  • Creep speed operation for tight turning
  • Handle with safety reversing switch and horn
  • 224Ah Maintenance free AGM integral batteries
  • Battery discharge indicator with hour meter
  • Key switch to limit access
  • Lift cylinder is hard chrome
  • Pump unit with motor, solenoid, & gear pump
  • Pressure compensated lowering valves
  • Regenerative neutral braking
  • Proportial Lift, Lower, Extend
  • Electromagnetic brake on armature shaft
  • Constant travel speed to throttle position
  • Automatic resetting circuit breaker
  • Vertically mounted drive motor
  • Lift, lower, tilt, extend, shift in handle
  • Bolt-on high visibility I-beam construction
  • Dual lifting chains
  • Class two ITA fork carriage with 36” tall LBR
  • Two piece power head cover
  • Gas Assist Spring Handle
  • Low Battery Interrupt

Options


  • 10" Single Load Wheels
  • ClearView Mast Guard
  • Extra Long or Short Forks
  • Industrial Battery