Request A Quote
Numerous options are available for lift tables. Below are a number of common options that are typically used. For more information, please select the option of your choosing. Lift Products also manufacturers a wide range of custom options.
Replacing standard hand pendent controls with foot controls allows for the operator to raise and lower the lift table while keeping their hands free.
Accordion Safety Skirting protects operators from pinch points as well as helping keep debris clear of the lift mechanism.
Available in two configurations: Low Profile (shown) which adds 1.5" to the lowered height or Standard Profile which adds 8.75".
2 rigid casters positioned flush with the base frame in combination with a dolly jack allows for repositioning while unloaded.
Available for any lift table with casters. Can be permanently mounted or removeable.
For use in lifting personnel in assembly applications. Gates, snap chains, and safety tread deck available. Not for use as an elevator.
Commonly used to transfer products from one conveying line to another. Can be customized per application requirements.
Ideal for assembly applications requiring adjustable height during the process or for product transfer between lines.
Tapered Toe Guards are required for pit mounting installations or when a lift application would create a shearing point.
Installed around the bottom perimeter of the platform, stops decent of the table upon contact with an obstruction.
Used for easy maintenance access to the motor in pit mounting as well as applications with enviromental considerations.
For food & drug applications numerous sections of a lift can be made from stainless steel including the base and top.
Can be made under the base frame or outboard mounted to allow for easy repositioning of the lift with a fork truck or jack.
A step down floor lock can be used on lift tables with casters in order to secure the lift into position during operation.
An anti-drift valve will stop hydraulic fluid from seeping back into the reservoir thereby stopping hydraulic drift over time.
In applications where AC is not desireable, a 24 volt DC motor can be used. Battery and charger are also available.
Air over hydraulic motor with air controls available for applications where electricity is not ideal.
The Precision Focus Control (PFC) by Lift Products is an exclusive design that allows for 2 speed control of hydraulic oil to a cylinder.