Mobile Lifts ::

Maxx Ergo-Lifter

Request MXE Quote


MXE-150 Thumbnail MXE-250 Thumbnail
Max Ergo-Lifter
MXE-150

The Maxx-Ergo-Lifter is a highly maneuverable light capacity lifter designed for multiple material handling applications. It is equipped with a standard platform and has a load capacity of 330 or 550 lbs.

Ideal for assembly operations, ergonomic applications and other material handling needs. The Maxx-Ergo-Lifter features a lift/lower button on a flexible control cord that allows the operator to be in the most comfortable position while lifting or lowering loads. The electric lift is battery operated and features an on board charger that runs on 110 volt input.

Also available are several optional attachments that customize the unit for specific applications including roll and coil handling attachments and a tote lifter attachment that are bolted on permitting the unit to be changed back to the standard platform when required.

Also available are several optional attachments that customize the unit for specific applications including roll and coil handling attachments and a tote lifter attachment that are bolted on permitting the unit to be changed back to the standard platform when required.

Request MXE Quote

Ergo-Lifter Handle

Ergonomic Handle

Foam wrapped handle provides comfortable grip. Controls and built-in charging cable are centrally located.

Limit Switch

Limit Switch

Magnetic upper and lower travel limit switches stop the lift platform by deactivating the associated circuit.

Battery Charge Indicator

Onboard BDI

Built-in battery charge indicator clearly shows remaining life of the (2)12V onboard batteries.

Easy Access Motor Cover

Easy Access

Service cover is easily removed by thumb screws for quick inspection and maintenance.

Specifications


ModelVertical
Travel
CapacityHeightPlatform
Size
StraddleMast
Height
Quote
Form
MinMaxIDOD
MXE-15054"330 lbs @ 9"LC5"59"18.5" x 23.5"18.3"23.3"70"Quote
MXE-25064.9"550 lbs @ 8"LC5.1"70"18.6" x 23.8"18.9"22"86.6"Quote
ModelMXE-150MXE-250
Travel54"64.9"
Capacity330 lbs550 lbs
Load Center9"8"
Lowered Height5"5.1"
Raised Height59"70"
Platform18.5" x 23.5"18.6" x 23.8"
Straddle ID18.3"18.9"
Straddle OD23.3"22"
Mast Height70"86.6"
Quote FormQuoteQuote

Standard Features


  • All swivel casters
  • Highly maneuverable
  • Caster brakes on rear
  • Automatic electronic overload protection
  • (2)12V Maintenance free and sealed batteries
  • Automatic on-board charger and cord
  • Upper and lower travel limit switches
  • Chain driven lift system
  • Safety belt rapid descent protection
  • Battery discharge indicator
  • Charging status lights
  • On/Off toggle switch
  • Ergonomic foam wrapped handle
  • Hand pendant push button up/down controls
  • Control holder on handle
  • Charging plug holder on handle
  • Quick change attachment options
  • Conforms to EN1757, CE marked

Options


V Cradle Attachment

V Cradle

Used for rolls or coils that require lifting from underneath. Ideal for placing rolls on and off a shaft

Single Ram Attachment

Single Ram

Suited for lifting coils or rolls through the core. The ram length is 24" long and 2" in diameter

Dual Ram Attachment

Dual Ram

Ram length is 17.75" and 2" in diameter. Distance between rams is 6". Can be used to cradle rolls or handle 2 small rolls through the core.

Roll Upender

Roll Upender

Handles rolls in the verticle and horizontal position. Expandable ram that holds the roll by turning the wheel. Ram is 11" long and is 2.9" in diameter.